WOODSHOP
IN THIS LESSON
Always wear safety glasses when operating.
Do not wear loose clothing, gloves, dangling jewelry, hoodie strings with this machine. Tie up long hair.
Verify correct blade is installed based on the material you are cutting. Do not cut metal with this saw. Verify blade faces the correct direction. Ask for assistance for changing the blade.
Only make saw adjustments when power is off and machine is not moving. Never touch the blade when plugged in.
Verify the blade is properly tensioned before use. usually to 4.5 or 5.
Line up your cut. Verify you can hold your piece without putting your hands in the blade zone. Only cut one piece at a time. Do not cut pieces smaller than 4” long. Do not cut through wood knots, splits, or other defects.
Allow motor to reach full speed before cutting.
Cut slowly and smoothly, keeping your hands and sleeves away from blade at all times.
Wait for the saw to stop moving completely and remove hand from trigger before removing material.
