This scroll saw is great for small, detailed work. With variable speed control and a reliable blade tensioning system, it offers smooth and accurate cuts on a variety of materials. You can feed the blade through a hole in your material to cut an inside shape.

Specifications:

• Wood Only

• 20” Bed

• Variable Speed

• 45 Degree bevels

• Cut depth: 1.5” max

Use & Safety Checklist:

1. Always wear safety glasses and hearing protection when operating.

2. Turn on Dust Collection System or connect to a shop vac.

3. Do not wear loose clothing, gloves, dangling jewelry, hoodie strings with this machine. Tie up long hair.

4. Verify correct blade is installed based on the material you are cutting. Do not cut steel or other hard metals with this saw. Verify blade faces the correct direction. Ask for assistance for changing the blade.

5. Adjust angle of blade as needed. Only make adjustments when power is off and machine is not moving. Never touch the blade when plugged in.

6. Verify the blade is properly tensioned before use.

7. Line up your cut. Verify you can hold your piece without putting your hands in the blade zone. Only cut one piece at a time. Do not cut pieces smaller than 4” long. Do not cut through wood knots, splits, or other defects.

8. Use push sticks or other appropriate tools to guide the material through the cut.

9. Allow motor to reach full speed before cutting.

10. Cut slowly and smoothly, keeping your hands and sleeves away from blade at all times.

11. Wait for the saw to stop moving completely and remove hand from trigger before removing material.