This sanding station is pretty basic. It’s great for dealing with rough edges, not as good for detailed work. Track and angle adjustments available.

Specifications:

• Wood Only

• Size: 4” x 36”

• 2/3 HP

Use & Safety Checklist:

1. Always wear safety glasses and hearing protection when operating. Avoid loose clothing, jewelry or anything that could get caught in the machine. Never wear gloves when operating.

2. Turn on Dust Collection System or shop vac if connected.

3. Locate emergency stop button prior to cutting.

4. Verify correct sand paper is installed based on the material you are sanding. Ask for assistance for changing the sand paper.

5. Adjust angle as needed. Only make adjustments when power is off and machine is not moving. Never touch the blade when plugged in.

6. Verify material is secure and against the fence. Verify you can hold your piece without putting your hands against the sand paper or without pinching your fingers. Only sand one piece at a time. Do not sand pieces smaller than 1”.

7. Sand slowly and smoothly, keeping your hands and sleeves away from blade at all times.

8. Stand in a stable position with feet shoulder-width apart while operating.

9. Clean up and debris or dust after use.