Compound Miter Saw

Wood Shop

The DW716 12" Double-Bevel Compound Miter Saw has a 15 Amp motor for extended power and durability. Features stainless steel miter detent plate and cam miter lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 6-5/8" of nested crown and 6-1/2" of base molding vertically. Lightweight design, head lock-down pin, and built-in carry handle for portability.

Specifications:

Wood Only
Cut depth: 2x8” cut at 90°, 2x6” cut at 45°
4,500 RPM
Blade Size: 12”

Safety:

Always wear safety glasses and hearing protection when operating
Never wear gloves or long sleeves when operating.
Secure any loose jewelry, long hair, hoodie strings, and other dangling objects.

Rules:

Do not cut metal with this saw.
Do not cut cylindrical objects with this saw.
Ask for assistance for changing the blade.
Never touch the blade when the saw is powered on.
Only cut one piece at a time.
Never cut material without use of the fence.
Do not cut pieces smaller than 6” long.
Do not cut through wood knots, splits, or other defects if possible.
Do not start saw with material touching the blade.

Step-by-Step Guide:

Adjust angle of blade as needed. If cutting at an angle, remove tall aluminum fence prior to cutting. Ensure swing arm is clear before cutting. Only make adjustments when power is off and machine is not moving.
Line up your cut and clamp down your material or hold it down with your other hand if your hand is not close to the blade. Verify it’s secure and against the fence. Verify you can hold your piece without putting your hands near the blade.
When ready, grasp handle firmly, pull trigger, and allow motor to reach full speed before cutting.
Cut slowly and smoothly, keeping your hands away from the blade at all times. Keep your body to the side of the blade, and do not overreach when cutting. Maintain proper balance.
Wait for the saw to stop moving completely and remove hand from trigger before removing material.
Clean up station when done.